Samsung's Galaxy Tab 3 series 7in tablet runs Android
4.1.2 out of box. The Galaxy Tab 3 7.0 users can now root
their tablets running on official Jelly Bean firmware.
Recognised XDA developer, Jamison904 has released a
pre-rooted firmware, which is an Odin flashable file, for
the Galaxy Tab 3 7.0. The pre-rooted file allows users to
root their Galaxy tablets. The root file has been reported
to be working fine. Besides, the developer has shared an
easy root guide.
Galaxy Tab 3 7.0 users who wish to root their tablets, may
follow our step-by-step guide. IBTimes UK reminds its
readers that it will not be held liable for any damage to
the device. Users are advised to verify that their devices
meet following requirements.
PREREQUISITES:
1) Install USB Driver for Samsung Galaxy Tab 3 7.0 to
transfer files between the Android device and computer.
2) Enable USB Debugging Mode on tablet to connect the
Android device with the computer and use the Android
SDK with it. [Press Menu>> Settings>> Applications .
From there navigate and click on Development option
then check USB Debugging Mode .]
3) As the tutorial might wipe out all data of the Galaxy
tablet, create a backup. If the device is having any custom
recoveries such as CWM/TWRP already installed then
backup the data using the recovery.
4) The Galaxy Tab should have above 80% battery charge.
5) The device should be factory unlocked and not locked
to a particular carrier.
6) The tablet will lose its manufacturer's warranty once it
is rooted. However, users can reclaim the warranty back
by unrooting the device later.
7) The CF-Auto-Root file works only on the Samsung
Galaxy Tab 3 7.0 SM-T210 and SM-T210R. As applying this
to any incorrect variant might brick the device, verify the
model number of the Galaxy device by selecting
Settings>> System >> About device>> Model number .
Steps to root Galaxy Tab 3 7.0 (SM-T210/T210R) on
Android 4.1.2
Step-1: Download root package for Galaxy Tab 3 7.0 to the
computer
File name: prerooted.tar.md5
Step-2: Download Odin v3.07 . Extract the Odin zip to get
Odin3 v3.07.exe
Step-3: Turn off the tablet and wait for about five to six
seconds for vibration to confirm complete power off
Step-4: Place the tablet into Download Mode by pressing
and holding Volume Down, Home and Power buttons
together. A warning screen will appear, now press the
Volume up button to continue to enter into Download
Mode
Step-5: Run Odin3 v3.07.exe as Administrator
Step-6: Connect the tablet to the computer using USB
cable while it is in the Download Mode. Wait for some
time until Odin detects the device. When the tablet is
connected to the computer successfully, an Added
message will appear under Odin message box. Also, the
ID:COM box in Odin will turn blue with the COM port
number indicating successful connection
Note: If the Added message does not come then try
another USB port, try the one located at the back side of
the computer. In case Odin still fails to recognise the
device then re-install USB driver.
Step-7: In Odin, click the PDA button and select
the .tar.md5 root file
Step-8: Ensure in Odin Auto Reboot and F.Reset
Time check boxes are selected. But uncheck the Re-
Partition option
Step-9: Double check everything and click the
Start button in Odin. The installation process should
begin now and would take a few minutes to complete
Step-10: When the installation process is completed, the
tablet will reboot automatically and soon a PASS message
with green background will appear in the extreme left
box at the top of Odin indicating successful installation.
Unplug the USB cable from the tablet to disconnect it
from the computer
Samsung Galaxy Tab 3 7.0 running on official Android
4.1.2 should be now rooted successfully. As the tablet
boots up, open the SuperSU and update the binary.
DOWNLOAD LINKS:
* usb drivers - http://www.mediafire.com/download/7iy79emc0bf1fb4/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
*pre rooted.tar.md5 (root package)- http://d-h.st/leL
*odin v3.07 - https://www.copy.com/s/wSEoPPbzYXmF/AndroidJinn.com_Odin307.zip
No comments:
Post a Comment